なんでも掲示板
[◆投稿フォームへ][◆発言検索][◆トップページへ]このページは過去の遺産として残してあるものです。書き込みはできません（書き込むと自動的にブラックリストに登録され、以後のアクセスができなくなります）。
| [1226] ReiserFS |
| Name: MIRA |
| Date: 2007/08/11 17:42:15 |
| Host: 55.67.30.125.dy.iij4u.or.jp (125.30.67.55) |
| User-Agent: Mozilla/5.0 (X11; U; Linux i686; ja; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4 |
|
先日サーバーが落ちて以来、どうも不安定だったのですが、昨日再起動したときに Aug 10 09:41:22 menkar kernel: ReiserFS: warning: is_tree_node: node level 860 does not match to the expected one 1 Aug 10 09:41:22 menkar kernel: ReiserFS: sda6: warning: vs-5150: search_by_key: invalid format found in block 144515869. Fsck? って出ていたので、/homeをアンマウントしてfsckしてみました。 reiserfsck --checkでは--rebuild-treeしろ、といわれたので10時間ほどかけて --rebuild-treeしました。結果、問題になっていたファイル(何故かアクセスできない) が削除されてしまいましたが、いちおうファイルシステム自体は正常になりました。 |
| [1225] Let's note CF-R6 |
| Name: MIRA |
| Date: 2007/08/07 18:42:05 |
| Host: baten.cetus-net.org (218.45.112.38) |
| User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.5) Gecko/20070730 Firefox/2.0.0.5 |
|
買ってしまいました。R3のHDDが壊れてしまったので… # R3はHDD交換してまだ使うつもりです。 とりあえずお約束のdmesg貼っておきます。MP kernelで使ってます。 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.25 (r6.mp) #4: Thu Jul 26 16:48:03 JST 2007 root@:/usr/src/sys/arch/i386/compile/r6.mp total memory = 1526 MB rbus: rbus_min_start set to 0x80000000 avail memory = 1490 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xfd651 mainbus0 (root) pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005800 pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005808 pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005810 pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x0000580c cpu0 at mainbus0 apid 0: (boot processor) cpu0: Intel Core 2 (Merom) (686-class), 1064.08 MHz, id 0x6f2 cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX> cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM> cpu0: "Intel(R) Core(TM)2 CPU U7500 @ 1.06GHz" cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu0: L2 cache 2 MB 64B/line 8-way cpu0: ITLB 128 4 KB entries 4-way cpu0: using thermal monitor 1 cpu0: Enhanced SpeedStep (892 mV) 1067 MHz cpu0: unknown Enhanced SpeedStep CPU. cpu0: using only highest and lowest power states. cpu0: Enhanced SpeedStep frequencies available (MHz): 1067 800 cpu0: calibrating local timer cpu0: apic clock running at 133 MHz cpu0: 64 page colors cpu1 at mainbus0 apid 1: (application processor) cpu1: Intel Core 2 (Merom) (686-class), 1064.00 MHz, id 0x6f2 cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX> cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu1: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM> cpu1: "Intel(R) Core(TM)2 CPU U7500 @ 1.06GHz" cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu1: L2 cache 2 MB 64B/line 8-way cpu1: ITLB 128 4 KB entries 4-way cpu1: using thermal monitor 1 ioapic0 at mainbus0 apid 2 ioapic0: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId <MATBIO,CFR6-2 ,06040000>, AslId <MEI ,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer mpacpi: could not get bus number, assuming bus 0 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured acpilid0 at acpi0 (PNP0C0D-0): ACPI Lid Switch acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method) acpibat0: battery info: Panasonic, LION, CF-VZSU49 01221 acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter acpiacad0: AC adapter online. acpibut0 at acpi0 (PNP0C0C-0): ACPI Power Button MAT0019 at acpi0 not configured MAT0021 at acpi0 not configured PNP0A08 at acpi0 not configured INT3402 at acpi0 not configured PNP0C02 at acpi0 not configured PNP0C02 at acpi0 not configured PNP0200 at acpi0 not configured hpet0 at acpi0 (PNP0103) hpet0: mem 0xfed00000-0xfed003ff hpet0: Found 64-bits HPET, will only use lowest 32-bits timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000 PNP0000 at acpi0 not configured npx1 at acpi0 (PNP0C04) npx1: io 0xf0 irq 13 npx1: reported by CPUID; using exception 16 PNP0C02 at acpi0 not configured PNP0B00 at acpi0 not configured attimer1 at acpi0 (PNP0100): AT Timer attimer1: io 0x40-0x43,0x50-0x53 irq 0 pcppi1 at acpi0 (PNP0800) pcppi1: io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 IFX0102 at acpi0 not configured acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller acpiec0: io 0x62,0x66 pckbc1 at acpi0 (PNP0320): kbd port pckbc1: io 0x60,0x64 irq 1 pckbc2 at acpi0 (SYN0002): aux port pckbc2: irq 12 PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured INT3403 at acpi0 not configured INT3403 at acpi0 not configured INT3401 at acpi0 not configured INT3400 at acpi0 not configured INT340E at acpi0 not configured acpitz0 at acpi0: ACPI Thermal Zone acpitz0: unable to get polling interval; using default of 30.0s acpitz0: passive cooling mode only acpitz0: critical 113.0C acpitz1 at acpi0: ACPI Thermal Zone acpitz1: unable to get polling interval; using default of 30.0s acpitz1: critical 130.0C passive 38.0C apm0 at acpi0: Power Management spec V1.2 pcppi1: attached to attimer1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pms0: Synaptics touchpad version 6.2 pms0: Palm detect, Multi-finger pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03) agp0 at pchb0: detected 7932k stolen memory agp0: aperture at 0xc0000000, size 0x10000000 vga0 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device (rev. 0x03) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 direct rendering for vga0 unsupported Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 22 (irq 10) azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2) azalia0: host: High Definition Audio rev. 1.0 ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02) wpi0: interrupting at ioapic0 pin 18 (irq 5) , JPN, address 00:1b:77:4b:d2:0a wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci0: interrupting at ioapic0 pin 23 (irq 7) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci1: interrupting at ioapic0 pin 19 (irq 11) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci2: interrupting at ioapic0 pin 18 (irq 5) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci3: interrupting at ioapic0 pin 16 (irq 11) usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02) ehci0: interrupting at ioapic0 pin 23 (irq 7) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled rtk0 at pci3 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) rtk0: interrupting at ioapic0 pin 19 (irq 11) rtk0: Ethernet address 00:0b:97:bf:e7:ff rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cbb0 at pci3 dev 5 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0x8d) Ricoh product 0x0822 (SD Host Controller system, revision 0x13) at pci3 dev 5 function 1 not configured cbb0: interrupting at ioapic0 pin 22 (irq 10) cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 4 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02) piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) ahcisata0 at pci0 dev 31 function 2: Intel 82801GBM AHCI SATA Controller ahcisata0: interrupting at ioapic0 pin 19 (irq 11) ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc710e000 atabus1 at ahcisata0 channel 0 atabus2 at ahcisata0 channel 2 Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured isa0 at pcib0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support isapnp0: no ISA Plug 'n Play devices found timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 azalia0: codec[0]: Sigmatel STAC9200 (rev. 34.1) azalia0: codec[0]: High Definition Audio rev. 1.0 azalia0: playback: max channels=2, encodings=1<PCM> azalia0: playback: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz> azalia0: recording: max channels=2, encodings=1<PCM> azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz> azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0) azalia0: codec[1]: High Definition Audio rev. 0.9 azalia0: codec[1]: No support for modem function groups azalia0: codec[1] has no audio function groups audio0 at azalia0: full duplex, independent Kernelized RAIDframe activated IPsec: Initialized Security Association Processing. acpibat0: battery info: Panasonic, LION, CF-VZSU49 01221 ahcisata0 port 0: device present, speed: 1.5Gb/s wd0 at atabus1 drive 0: <TOSHIBA MK8037GSX> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) ahcisata0 port 2: PHY offline boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs |
| [1224] Nice site! |
| Name: AndyGreek |
| E-Mail: loginsrk@gawab.com |
| Date: 2007/06/12 15:41:47 |
| Host: 85.159.41.10 (85.159.41.10) |
| User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.8.0.3) Gecko/20060426 Firefox/1.5.0.3 |
| URL: http://google.com |
|
Nice site! a pleasant suprise |
| [1223] Re: opteron (元の記事) |
| Name: MIRA |
| Date: 2007/06/09 20:47:23 |
| Host: 113.66.30.125.dy.iij4u.or.jp (125.30.66.113) |
| User-Agent: Mozilla/5.0 (X11; U; Linux i686; ja; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4 |
|
> 最近 ./build.sh をすると 3 時間コースです。多分手元にある機械のうちで最速の 2.66GHz の Pen D でも 2 時間くらいかかります。ところが他の人は macbook (core2duo) だと 1 時間くらいだということで出来たら速い機械があるといいな、でも I 印は出来れば避けたい、まあ現状でもいいかな、とも思っています。 > > で、例えば opteron って速いのでしょうか ? (ってそれだけじゃ何とも (?)) Opteronは使ったことがないのでよくわからないです。 京都に来る2ヶ月くらい前にいじったDual Core Xeon 2GHz×2、メモリ8GBなホスト2台をiSCSI Storageにつないで、VMWare Infrastructure な環境の上に作った仮想環境(CPU2コア，メモリ2GB割り当て)だと1時間以内に ./build.shが終わっていました（正確な時間は計ってないのでよくわからないですが）。 |
| [1222] opteron (元の記事) |
| Name: mef |
| Date: 2007/04/08 12:38:35 |
| Host: gw.ki.nu (218.44.234.233) |
| User-Agent: Mozilla/5.0 (X11; U; NetBSD macppc; en-US; rv:1.8.0.11) Gecko/20070403 Firefox/1.5.0.11 |
|
> というわけで京都に引越しました。 おおっ、仕事が見つかって良かったですね.. うらやましい。 (話は変って) 最近 ./build.sh をすると 3 時間コースです。多分手元にある機械のうちで最速の 2.66GHz の Pen D でも 2 時間くらいかかります。ところが他の人は macbook (core2duo) だと 1 時間くらいだということで出来たら速い機械があるといいな、でも I 印は出来れば避けたい、まあ現状でもいいかな、とも思っています。 で、例えば opteron って速いのでしょうか ? (ってそれだけじゃ何とも (?)) |
| [1221] Re: 引越し (元の記事) |
| Name: MIRA |
| Date: 2007/04/02 18:07:25 |
| Host: h186.p052.iij4u.or.jp (210.130.52.186) |
| User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; ja-JP; rv:1.8.1.1) Gecko/20061230 BonEcho/2.0.0.1 |
|
> 4月から京都に行くことになりました。 > 任期が最長でも3年なので、ここのサーバーは実家に残しておきます。 というわけで京都に引越しました。 まだ何もない状態ですが、とりあえずPCを出してPHSで接続してみた。 |
| [1220] 引越し |
| Name: MIRA |
| Date: 2007/03/18 00:53:02 |
| Host: baten.cetus-net.org (218.45.112.38) |
| User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; ja-JP; rv:1.8.1.1) Gecko/20061230 BonEcho/2.0.0.1 |
|
4月から京都に行くことになりました。 任期が最長でも3年なので、ここのサーバーは実家に残しておきます。 |
| [1219] Re: WZERO3 (元の記事) |
| Name: MIRA |
| Date: 2007/01/31 19:24:50 |
| Host: baten.cetus-net.org (218.45.112.38) |
| User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; ja-JP; rv:1.8.1.1) Gecko/20061230 BonEcho/2.0.0.1 |
|
> > とりあえずucomで見えて、USB-modemとして動くようになりました。 send-prしたらさっそくcommitされました。 しかし、どうもchatスクリプトのATに対してOKが帰ってこない時が多いような？？？ ATを2つ入れておくとうまく動くのだけれど… ABORT "NO CARRIER" ABORT "ERROR" ABORT "NO DIALTONE" ABORT "BUSY" ABORT "NO ANSWER" "" "AT" "" "AT" OK "ATD電話番号" CONNECT \r\n |
| [1218] Re: WZERO3 (元の記事) |
| Name: MIRA |
| Date: 2007/01/31 09:55:48 |
| Host: baten.cetus-net.org (218.45.112.38) |
| User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; ja-JP; rv:1.8.1.1) Gecko/20061230 BonEcho/2.0.0.1 |
|
> とりあえずucomで見えて、USB-modemとして動くようになりました。 http://www.cetus-net.org/ftp/NetBSD/patch/ws007sh.patch |
| [1217] WZERO3 |
| Name: MIRA |
| Date: 2007/01/31 03:09:33 |
| Host: h091.p050.iij4u.or.jp (210.130.50.91) |
| User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; ja-JP; rv:1.8.1.1) Gecko/20061230 BonEcho/2.0.0.1 |
|
とりあえずucomで見えて、USB-modemとして動くようになりました。 iPAQとして認識させています。 uipaq0 at uhub0 port 1 uipaq0: SHARP CORPORATION SHARP WS007SH USB Modem Driver, rev 2.00/0.90, addr 2 ucom0 at uipaq0: Generic 今NetBSDからUSBケーブルでWZERO3に継いでそこからPPP接続して書いています。 |